KKS Ultraschall AG, Frauholzring 29, CH-6422 Steinen | 
Ultrasonic equipment
The main mechanism of ultrasonic cleaning is given by highly energetic ultrasound-waves which are released into a suitable ultrasound conducting fluid (an aqueous or organic solvent, depending on the application) where the parts, which have to be cleaned, are immersed.
The Ultrasonic Cleaning 
An ultrasonic cleaning system usually consists of a working chamber made in stainless steel with an ultrasonic conducting liquid and an ultrasound generating transducer which is either build onto the chamber or may be immersed into the fluid.
Download: The Ultrasonic Cleaning
- Ultrasonic-Generator KKS FT-MG
- The modular type of ultrasonic generator type FT-MG is designed for the use in industrial equipments with high ultrasonic power and with BUS-interface to a numeric control.
The KKS-FT-MG Generator combines efficiency, flexibility by a compact design. The modular design allows customizing power and frequency (DUAL or Single Frequency) according to the specific needs. - Download Datasheet: Ultrasonic-Generator KKS FT-MG
- Ultrasonic-Generator KKS FT-TM
- The ultrasonic generator type FT-TM is designed for industrial applications with continuous output power of max. 2000 Watt. The KKS-FT-MG generator with its very compact design gives high flexibility and efficiency.
- Download Datasheet: Ultrasonic-Generator KKS FT-TM
- Ultrasonic-Generator KKS RS-K
- The ultrasonic generator type RS-K is designed for applications with continuous output power of max. 1000 Watt. Its compact design without an active, integrated cooling system is ideal for the mounting into the base-frame of cleaning units where only limited space is available.
- Download Datasheet: Ultrasonic-Generator KKS RS-K
- Immersible Ultrasonic Transducer
- KKS rectangular, immersible transducers are made of stainless steel 1.4462 / ASTM A182 F51, a special material with high resistance against cavitation damage, with thicknesses of 2, 3 or 5 mm. Those transducers can be designed according the specific need and connection possibilities. They can be placed either on the bottom or on the side of the working chamber.
- Download Datasheet: Immersible Ultrasonic Transducer
- Plate Type of Ultrasonic Transducer
- KKS plate type transducers are made of a straight or bent stainless steel 1.4462 / ASTM A182 F51, a special material with high resistance against cavitation damage, and a thickness of 2 mm. This space-saving system of transducer is flange-mounted from outside, with screws into an appropriate aperture in the cleaning tank by means of a welded frame, seal and contact frame.
- Download Datasheet: Plate Type of Ultrasonic Transducer
- "Longlife" Ultrasonic Transducer
- The robust design of the "Longlife" transducers is given by the stainless steel 1.4462 / ASTM A182 F51, a special material with high resistance against cavitation damage, a membrane thickness of 5 mm and a housing of 3 mm. This type of transducer is available as a standard for an ultrasonic frequency of 25 kHz.
- Download Datasheet: "Longlife" Ultrasonic Transducer
